Drawer Limit - Sam4s ER-650 Operation And Program Manual

Drawer Limit

You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program
here, a warning will display on the screen. You must press CLEAR to remove the warning
and continue operations. The warning will continue to appear at the completion of every
transaction with the limit exceeded, until you use the PAID OUT function to remove cash
from the drawer.
Set the drawer limit to 0 to disable the drawer limit warning.
ER-650/650R
4. Type the new or additional stock quantity and press ENTER. Note that stock is
kept in decimal units and you must enter new or additional stock to two digits
beyond the decimal. For example, type 1 0 0 0 to enter ten units of inventory.
5. Return to step 2 to continue recording inventory, or press ESC to return to the
PROGRAM MODE menu.
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 2 for DRAWER LIMIT.
The LIMIT PROGRAM screen displays:
DRAWER LIMIT
3. Type the amount you wish to use for a limit (or type 0 for no limit.) Press
ENTER.
LIMIT PROGRAM
0.00
Program Mode Programming • 223