Item Registrations - Sam4s ER-650 Operation And Program Manual

Item Registrations

All registrations are accumulated into PLUs. Keyboard PLUs are fixed keys on the
keyboard (like traditional department keys) that access specific PLUs.
As you make item registrations, you can follow your entries by viewing the display.
Remember that the sale and tax totals are updated automatically with each entry.
Using Function Look-Up Keys
Because the ER-650/650R keyboard is programmable, both the selection and location of
function keys may vary from one register to another.
You must pay particular attention to the two function look-up keys, FUNCTION LOOK-UP
#1 and FUNCTION LOOK-UP #2. Each of these keys can contain a list of up to 8
functions that can be used as if they were located on separate keys. For example:
ER-650/650R
•
On the default keyboard, there are 30 Keyboard PLU keys and the PLU#
assigned to the key is the same, i.e. Keyboard PLU number one is PLU #1.
However, through programming, you can assign any PLU number you wish to
any one of the 69 possible Keyboard PLU keys.
•
Traditional PLUs can also be registered by entering the PLU number and
pressing the PLU key.
•
If optional scanning is implemented, the PLU number corresponds to the UPC
number and a PLU is registered when an item is scanned.
•
If a function, such as CHARGE1, is located on a function look-up key, as it is on
the default keyboard, then you must access it by pressing the appropriate function
look-up key, then pressing the digit that represents the function, instead of
pressing a key on the keyboard.
•
If you need to make a numeric entry before a function that is located on a
function look-up key, first press the numeric key or keys, then press the function
look-up key and press the digit that represents the function you wish to select.
Operating Instructions • 25