System Settings - Datamax M-Class Operator's Manual

5.1.5 System Settings

CONFIGURATION FILE ♦
RESTORE AS CURRENT
SAVE SETTING AS
DELETE FILE
FACTORY SETTING FILE
INTERNAL MODULE D
1024 KB (100-5120)
DEFAULT MODULE
D
SCALEABLE FONT CACHE
0312 KB (100-5120)
SINGLE BYTE SYMBOLS
PC_850 MULTILINGUAL
DOUBLE BYTE SYMBOLS
UNICODE
GB
BIG 5
JIS
SHIFT JIS
EUC
TIME AND DATE
M-Class
Options for storage and recall of printer configuration files. See Appendix E for
details.
Provides a list of available configuration files. Selecting a file from the list causes a
printer reset; afterward, the printer is configured according to the activated file.
Saves the entire effective configuration of the printer to a file. Unique names with
up to nineteen characters are possible.
Provides a list of available configuration files. Files selected are immediately
removed, freeing the module.
Note: A currently activated file can not be deleted
Provides a list of available configuration files. The selected file will be restored
whenever a Level 1 reset is performed; see Section 6.7.
Sets the number of 1K blocks allocated for the internal RAM 'D' module.
Sets the default module used to store files when no other module is specified.
Available choices are G=FLASH memory or D=RAM memory
Sets the number of 1K blocks allocated for the scaleable font engine. Available
memory dependent upon model.
Selects the code page used to print single byte fonts unless otherwise specified in DPL.
One of many selectable standard sets; see the Class Series Programmer's Manual
for details.
When equipped with the ILPC option, this selects the code page used to print double
byte fonts unless otherwise specified in DPL; see the Class Series Programmer's
Manual.
Unicode (including Korean)
Government Bureau Industry Standard; Chinese (PRC)
Taiwan encoded
Japanese Industry Standard
Shift Japanese Industry Standard
Extended UNIX Code
Allows the user to set the time and date.
.
49