Table of Contents
Advertisement
Advanced Entry Calibration (continued)
Step
Operator Action
13 Using the
Key, select the
FWD
Gain Number determined in Step
12. Press the
select the setting.
14
Place the media in the Media
Sensor. Record the sensor
reading and label it 'P'
(paper).
Place the backing, mark, or
notch in the Media Sensor.
Record the sensor reading and
label it 'G' or 'M' (Gap or
Mark).
Remove all media. Record
the sensor reading and label it
'E' (Empty).
15 Press the
Key. Then
press the
Key.
FWD
76
Displayed Message
!
HBJO!USBO!!!!!!=zzz?+1
9!!!!!!!!!)1!.!42*!
!
Key to
Or, for reflective media:
HBJO!SFGM!!!!!!=zzz?+1
9!!!!!!!!!)1!.!42*!
!
HBJO!USBO!!!!!!=zzz?+1
9!!!!!!!!!)1!.!42*!
!
Or, for reflective media:
HBJO!SFGM!!!!!!=zzz?+1
9!!!!!!!!!)1!.!42*!
!
BEWBODFE!FOUSZ!
TFOTPS!MFWFMT!
!
Comment
Selection is denoted with an '*'.
Where 'yyy' is a numerical value representing the
current sensor reading.
The sensor readings must be manually entered into
the printer now.
M-Class
Advertisement
Table of Contents
