Datamax M-Class Operator's Manual page 126

8. Use the and
REV
FWD
flashing value. Press the
field. Once all fields are correct press the
The value will automatically be saved.
You can then use the
and 'GATEWAY' menu items and set those values in the same
manner as the
'IP ADDRESS'
Note: When the menu item 'IP DISCOVERY' is set to enabled you will not be able to change the values for the "IP
ADDRESS', 'SUBNET MASK', or 'GATEWAY' menu items. The values displayed are for reference only and
will become active once 'IP DISCOVERY' set to disabled.
9. Once you have the proper addresses set, press the
repeatily until you have exited the printer's menu. Turn OFF the
printer and then back ON.
Once you have entered your IP settings into the printer you can then install the port and printer driver using the Windows ®
'Add a Printer Wizard'. See section, Installing the Printer Driver and Port in this document.
118
buttons to increment/decremnt the
button to move to the next
to scroll to the 'SUBNET MASK
FWD
was set.
JQ!BEESFTT!
+2:3/111/111/2:3!
button once.
TVCOFU!NBTL!
+111/111/111/111!
HBUFXBZ!
+111/111/111/111!
button
XFE!21;27B!13KVM3114!
SFBEZ!
M-Class