Table of Contents
Advertisement
Communications (continued)
FEEDBACK CHARACTERS
ENABLED
DISABLED
ESC SEQUENCES
ENABLED
DISABLED
HEAT COMMAND
ENABLED
DISABLED
SPEED COMMANDS
ENABLED
DISABLED
TOF SENSING COMMANDS
ENABLED
DISABLED
SYMBOL SET COMMAND
ENABLED
DISABLED
CNTRL-CODES (DATA)
ENABLED
DISABLED
STX-V SW SETTINGS
ENABLED
DISABLED
58
Returns a Hex 1E, [RS], after each label successfully prints, and a Hex 1F, [US], after each
batch of labels is printed.
Feedback characters are sent to the host.
No feedback characters are sent.
Allows data containing invalid ESC control code sequences to be processed, helpful because
some systems send a "banner" to the printer.
Normal printer operating mode.
ESC sequences are ignored and the data is processed. Bitmapped font downloads are disabled in
this mode.
Allows the user to disable the DPL Heat Command, providing compatibility with other
DATAMAX printers.
Normal printer operating mode.
DPL Heat commands are ignored. The heat value is controlled via the menu setting; see Section
5.1.3.
Allows the user to disable the DPL speed commands (Print, Feed, Slew, and Reverse).
Normal printer operating mode.
DPL speed commands are ignored. The speeds are controlled via the menu setting; see Section
5.1.3.
Allows the user to disable the DPL Top of Form commands (Gap, Continuous, and Reflective).
Normal printer operating mode.
DPL TOF commands are ignored. The TOF is controlled via the menu setting; see Section 5.1.2.
Allows the user to disable the DPL Single and Double Symbol Set selection commands.
Normal printer operating mode.
DPL Symbol Set commands are ignored. The Symbol Set selection is controlled via the menu
setting; see Section 5.1.5.
Allows the user to remove control codes (data < 20 Hex) from the data fields. The selected line
terminator is processed.
Normal printer operating mode.
DPL Control Code (SOH, STX, CR, ESC, and ^) functions are ignored.
Allows the user to disable DPL software switch settings commands.
Normal printer operating mode.
DPL option-enable command (<STX>V) is ignored.
M-Class
Advertisement
Table of Contents
