Datamax M-Class Operator's Manual page 62

System Settings (continued)
SOP EMULATION ♦
110 (PRODPLUS)
220 (ALLEGRO)
250 (PRODIGY)
DISABLED
BACK AFTER PRINT
ENABLED
DISABLED
FONT EMULATION ♦
STANDARD FONTS
CG TIMES
USER ID S50
MENU LANGUAGE ♦
ENGLISH
FRANCAIS
ITALIANO
DEUTSCH
ESPAÑOL
USER DEFINED
54
Enables the <STX>O and <STX>f print positioning commands to allow backward
compatibility with label formats designed for other printers.
Emulates the Prodigy Plus
®
Emulates the Allegro printer.
™
Emulates the Prodigy printer.
No emulation: natural start of print position. (System Commands <STX>O and
<STX>f are ignored).
When the present distance is set with the GPIO enabled, this determines the timing
of the label back up.
Commands the printer to immediately back up the label after the applicator issued
start of print signal is received for faster throughput.
The printer will not initiate repositioning until the next label is ready to print. May
help prevent the curling of the label edge.
The selected font is substituted for all Datamax internal fonts. This function
provides the printer to define a new default font without changing the host DPL data
streams.
Selects the language in which the menu system messages and configuration label are
shown. Only languages that are resident will be available.
English
French
Italian
German
Spanish
User defined, downloaded language(s).
®
printer.
(Displayed only if a download file is present).
M-Class