Quick Test Mode - Datamax M-Class Operator's Manual

5.3 Quick Test Mode

This section explains the functions of the resident Quick Tests, accessible by pressing the
(1) With the exception of the Configuration Label, all Quick Test labels require 4-inch (102mm)
Notes:
wide media to print the entire format. If using narrower media, change the Label Width setting
(Section 5.1.2) to match your media's width to avoid printing on the platen.
(2) During any Quick Test, press the
(3) Using the 'Print Test Rate' feature (Section 5.1.7), a time delay can be set for printing labels
in Quick Test Mode.
M-Class
Key or the Key to stop printing.
Key on the Front Panel.
63