Specifications - Datamax M-Class Operator's Manual

Printers
Table of Contents

Advertisement

Warning Messages:
Warning Messages are displayed for a period of five seconds. If multiple warnings are detected, the display will reflect the
highest priority message.
Displayed Message
!
!
EPU!GBJMVSF!
!
!
HBQ!NPEF!
XBSOJOH!MPX!CBDLJOH!
!
!
!
HPPECZF!
!
!
!
IPTU!DIBOHFT!QFOEJOH!
!
!
!
MPX!WPMUBHF!
!
!
SUD!SBN!GBJMVSF!
!
!
!
JQ!EJTDPWFS!GBJMFE!
!
!
!
UFNQFSBUVSF!QBVTF!
M-Class
Printer Warning Messages
Description
The printer has detected
defective printhead elements.
The printer measured only a
small difference between the
'empty' and 'gap' sensor
readings.
Power has been removed and
shutdown is in progress.
The host has pending
configuration changes that
will not take effect until a
'host reset command' is
issued.
The printer has detected a low
operating voltage.
The printer was unable to find
a
The printer was unable to find
a DHCP server.
A high printhead temperature
has been detected.
Replace the printhead if the print quality becomes
unacceptable.
Transparent backing or notched media typically gives this
indication. In this case, there may be a slight delay in the
'Out of Stock' indication, after the media supply is emptied;
no action is required.
The printer power switch was turned 'Off', the line fuse has
blown, or AC line voltage has been lost.
To save changes, send a host reset command (in DPL), or to
discard changes perform a Soft Reset; see Section 6.7.
Possible low or fluctuating line voltage level. Try moving the
printer to another outlet. When more than 50% black is being
printed, try reducing the Heat Value or the size of the black
image. If the condition persists, call for service.
Possible faulty Main PCB. If the condition persists, call for
service.
This message does not effect the operation of the printer and
can be cleared from the display by pressing the
button. To stop this from reoccurring be sure the menu item
'IP DISCOVERY' is set to 'DISABLED', see Section 5.1.6.
No action required. Printing will resume after the printhead
cools.
Action(s)
FEED
95

Advertisement

Table of Contents
loading

Table of Contents