Nothing Appears On The External Monitor; I Want To Change The Language For Messages And Menus; Email Is Not Received Even If A Problem Occurs In The Projector - Epson EB-Z10005U User Manual

Problem Solving

Nothing appears on the external monitor

Check
Are images being input from a port other than the Computer
input port or BNC input port?
Are you projecting a split screen?
Is the projector in standby status?

I want to change the language for messages and menus

Check
Change the language setting.

Email is not received even if a problem occurs in the projector

Check
Is Standby Mode set to Communication On?
Did a fatal error occur and the projector come to a sudden stop?
Is power being supplied to the projector?
Is the mail notification function set correctly in the Network menu? An error notification email is sent according to the Mail settings in the Network menu. Check if it is set correctly.
Only RGB signals from the Computer input port or the BNC input port can be displayed on an external
monitor.
Only RGB signals projected on the left screen from the Computer input port or the BNC input port can be
displayed on an external monitor.
s "Projecting Two Images Simultaneously (Split Screen)"
Check that Standby Mode, A/V Output, and Monitor Out in the Configuration menu are set correctly.
s Extended - Standby Mode p.122
s Extended - A/V Settings - A/V Output
s Extended - A/V Output - Monitor Out
Select the Language in the Extended menu.
s Extended - Language p.122
To use the mail notification function when the projector is in standby, set Communication On in Standby Mode in the
Configuration menu.
s Extended - Standby Mode p.122
When the projector comes to a sudden stop, email cannot be sent.
If the error state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
s Network - Mail p.134
Remedy
p.91
p.122
p.122
Remedy
Remedy
168