Adjusting Projected Images; Correcting Distortion In The Projected Image - Epson EB-Z10005U User Manual

Adjusting Projected Images

Correcting Distortion in the Projected Image

You can correct keystone distortion in projected images using one of the
following methods.
• H/V-Keystone
Manually correct keystone distortion in the horizontal and vertical
directions independently.
"H/V-Keystone" p.61
s
• Quick Corner
Manually correct the four corners independently.
"Quick Corner" p.62
s
• Curved Surface
Manually correct distortion that occurs when projecting on a curved
surface, and adjust the amount of expansion and contraction.
"Curved Surface" p.63
s
• Point Correction
Corrects slight distortion which occurs partially, or adjusts the image
position in an overlapping area when projecting from multiple projectors.
"Point Correction" p.65
s
• Corner Wall
Manually correct distortion that occurs when projecting on a surface with
right angles, such as a square pillar or the corner of a room, and adjust
the amount of expansion and contraction.
"Corner Wall" p.67
s
60