Displaying A Test Pattern - Epson EB-Z10005U User Manual

Installing the Projector

Displaying a Test Pattern

A test pattern can be displayed to adjust the projection status without
connecting video equipment.
The shape of a test pattern depends on the setting in Screen Type. Set the
Screen Type first.
"Screen Settings" p.32
s
a
Press the [Test Pattern] button while projecting.
b
Press the [ ][ ] buttons on the remote control or the [
on the control panel to change the test pattern.
Using the remote control
] button
Using the control panel
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name
Image
Signal
Settings
Extended
*1 Except for Customized
*2 Except for Black Level
a
To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
c
Press the [Esc] button to close the test pattern.
Sub Menu/Items
Color Mode s p.70
Color Temp.
Advanced
*1
- Gamma p.76
s
- RGB
- RGBCMY s p.76
Reset
Auto Setup
Geometric Correction s p.60
Multi-Projection *2 p.80
s
34