Epson EB-Z10005U User Manual page 178

Replacing Consumables
d
Attach the new lamp.
Insert the lamp along the guide rail in the correct direction so that it
fits in place and press it firmly all the way to the back. Pull down the
lock lever until it clicks into place.
e
Close the lamp cover.
Press the cover against the unit and slide it to the right until it
clicks.
Attention
• Make sure you attach the lamp securely. If the lamp cover is opened,
the power turns off automatically as a safety precaution. If the lamp or
the lamp cover is not attached correctly, the power does not turn
on.
• This product includes a lamp component that contains mercury (Hg).
Please consult your local regulations regarding disposal or recycling.
Follow the disposal regulations of your workplace if they apply.
178