Quick Corner - Epson EB-Z10005U User Manual

Adjusting Projected Images

Quick Corner

This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select Quick Corner, and then press the [
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
d
Press the [ ][ ][ ][ ] buttons to select the corner you want to
adjust, and then press the [
] button.
] button again.
] button.
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select Yes to reset the result of Quick Corner corrections.
e
Press the [ ][ ][ ][ ] buttons to correct the position of the
corner.
When you press the [ ] button, the screen shown in step 4 that
allows you to select the area to be corrected is displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
f
Repeat steps 4 and 5 as needed to adjust any remaining corners.
g
When the corrections are complete, press the [Menu] button.
62