Replacing Consumables; Replacing The Lamp; Lamp Replacement Period - Epson EB-Z10005U User Manual

Replacing Consumables

This section explains how to replace the lamp and the air filter.

Replacing the Lamp

Lamp replacement period

It is time to replace the lamp when:
• The following message is displayed.
"It is time to replace your lamp. Please contact your Epson projector
reseller or visit www.epson.com to purchase."
The message is displayed for 30 seconds.
• The power indicator is flashing blue, and the Lamp1 or Lamp2
indicator is flashing orange.
"Reading the Indicators"
s
p.141
• The projected image gets darker or starts to deteriorate.
Attention
• Make sure you use the specified lamps. When performing portrait projection,
make sure you use the portrait mode lamps.
Standard replacement lamps: ELPLP81 (one pack)/ELPLP82 (two packs)
Portrait mode lamps for replacement: ELPLP83 (one pack)/ELPLP84 (two
packs)
• Do not use standard replacement lamps for portrait projection. Also, only use
the portrait mode lamps for portrait projection.
• Make sure you attach lamps on both Lamp 1 and Lamp 2. Attach the same
type of lamps on both Lamp 1 and Lamp 2.
• The lamp replacement message is set to appear after the following time
periods to maintain the initial brightness and quality of the projected images.
EB-Z10005U/EB-Z10000U/EB-Z11000W/EB-Z11005/EB-Z11000
Standard Lamps
When using Power Consumption continually at Normal: About 1,900 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
EB-Z9875U/EB-Z9870U/EB-Z9900W
Standard Lamps
When using Power Consumption continually at Normal: About 2,400 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
EB-Z9750U/EB-Z9800W/EB-Z9870
Standard Lamps
When using Power Consumption continually at Normal: About 2900 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
175