H/V-Keystone - Epson EB-Z10005U User Manual

Adjusting Projected Images
a
• You cannot combine multiple adjustment methods. However, you
can use Point Correction after performing Curved Surface or Corner
Wall.
• When you want to re-adjust the projection position and so on, if
you want to release the correction status temporarily, set the
Geometric Correction to Off. Even when it is set to Off, the
correction values are saved.
s Settings - Geometric Correction

H/V-Keystone

Manually correct keystone distortion in the horizontal and vertical
directions independently. The angle of vertical and horizontal tilt for the
projector can be corrected up to 30 degrees against the screen. (The
specifications are when a standard zoom lens ELPLS04 is attached).
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select H/V-Keystone, and then press the [
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
p.121
] button.
] button.
d
Press the [ ][ ] buttons to select the correction method, and
then use the [ ][ ] buttons to make the corrections.
V-Keystone
H-Keystone
a
When you correct keystone distortion, the projected image may
be reduced.
e
To complete the corrections, press the [Menu] button.
61