Epson EB-Z10005U User Manual page 69

Adjusting Projected Images
h
Press the [ ][ ][ ][ ] buttons to select the area you want to
adjust, and then press the [
Adjustment tips
When selecting Horizontal Corner:
Adjust the upper area based on the lowest point (indicated by the
arrow).
Adjust the lower area based on the highest point (indicated by the
arrow).
] button.
A
B
When selecting Vertical Corner:
Adjust the left and right based on the point nearest to the vertical
line in the center of the screen.
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select Yes to reset the result of Corner Wall.
i
Press the [ ][
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
j
Repeat steps 8 and 9 as needed to adjust any remaining parts.
If the image expands and contracts, go to the next step and adjust
the linearity.
k
Press the [Esc] button to display the screen from step 4. Select
Linearity, and then press the [
U
V
][ ][ ] buttons to adjust the shape.
] button.
69