Corner Wall - Epson EB-Z10005U User Manual

Adjusting Projected Images

Corner Wall

Manually correct distortion that occurs when projecting on a surface with
right angles, such as a square pillar or the corner of a room, and adjust the
amount of expansion and contraction.
Project from the front with the horizontal lens shift in the center.
"Adjusting the Position of the Projected Image (Lens shift)"
s
a
• Project onto a surface with a right angle.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• You may not be able to adjust Corner Wall correctly when using the
short throw zoom lens ELPLU02.
Correction method
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
p.35
c
Select Corner Wall, and then press the [
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
d
Select Corner Type, and then press the [
67
] button.
] button again.
] button.