Base; Interface - Epson EB-Z10005U User Manual

Part Names and Functions

Base

Name
A
Remove the cover, and pass the cable down through here.
Cable wiring slot
(bottom)
s "Attaching and Removing the Interface Cover"
p.28
B
s "Adjusting the tilt of the projected image (for normal
Front feet
installment)"
C
Rear feet s "Adjusting the tilt of the projected image (for normal
installment)"
Function
p.36
p.36

Interface

You can access the following ports by removing the interface cover. For
information on how to remove the interface cover and connect video
equipment, see the following.
"Attaching and Removing the Interface Cover"
s
"Connecting Equipment"
s
Name
A
Inputs SDI signals from video equipment.
SDI input port
(For EB-Z10005U/EB-
Z10000U/EB-Z9875U/
EB-Z9870U only)
B
BNC input port For analog RGB signals from a computer and component
video signals from other video sources.
C
For composite video signals from video sources.
Video input port
p.28
p.41
Function
16