B39 Check Circuit 771 (P/Y) For Short To Power; B40 Check Circuit 762 (Y/W) For Short To Power; B41 Check Circuit 762 (Y/W) For Open - Ford Expedition 1998 Workshop Manual

1998 Expedition/Navigator Workshop Manual

B39 CHECK CIRCUIT 771 (P/Y) FOR SHORT TO POWER

GEM C241

B40 CHECK CIRCUIT 762 (Y/W) FOR SHORT TO POWER

Transfer Case Assembly C201

B41 CHECK CIRCUIT 762 (Y/W) FOR OPEN

http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWJ/~MUS~LEN/21/...
No
REPAIR circuit 771 (P/Y). CLEAR the DTCs. TEST the system for normal operation.
Measure the voltage between transfer case assembly C201-5, circuit 771 (P/Y), and ground.
Is any voltage indicated?
Yes
REPAIR circuit 771 (P/Y). CLEAR the DTCs. CYCLE the ignition switch to OFF, then ON. TEST the system for
normal operation.
No
GO to B40.
Measure the voltage between the GEM C241-12, circuit 762 (Y/W), and ground.
Is any voltage indicated?
Yes
REPAIR circuit 762 (Y/W). CLEAR the DTCs. CYCLE the ignition to OFF, then ON. TEST the system for normal
operation.
No
GO to B41.
Measure the resistance between transfer case assembly C201-10, circuit 762 (Y/W), and GEM C241-12, circuit
762 (Y/W).
Page 31 of 64
8/30/2010