Notes Before Operating The Server; Auto-Run Function From Cd-Rom Drives - Fujitsu primergy TX150 User Manual

5.5 Notes Before Operating the
Server
This section explains the settings required before starting to operate the server.
For details on the settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx
• If a LAN card was added, install a driver according to "4.3 Installing the LAN Driver" ( pg.133).
• When connecting a SCSI optional device (such as a hard disk cabinet or DAT), connect it according
to "Chapter 7 Installing Internal Options" ( pg.183).
• For the settings for the installed applications supplied with the product, refer to the manuals of each
application.

5.5.1 Auto-run Function from CD-ROM Drives

Perform the following procedures to change the settings of the auto-run function from the CD-ROM
drives after server installation:
1
Make the registry editable, and change the value of AutoRun of the following
registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CDRom
Set the value of Autorun to "1" to enable auto-run, and set the value to "0" to disable auto-run.
2
Restart the system.
The setting is enabled after the system is restarted.
PRIMERGY TX150 S4 User's Guide
5
161