11
SERVICE WORK ON THE CHASSIS
11.27
Securing the air filter box cover
11.28
Sealing the air filter box
11.29
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
11.30
Installing the main silencer
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Drill a hole at marking
Guideline
Diameter
S00846-10
Finishing work
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Seal the air filter box in marked area
S00847-10
Finishing work
–
Install the air filter box cover. (
–
Detach spring
Spring hook (50305017000)
–
Remove screws
F01028-10
–
Position the main silencer.
–
Mount screws
–
Attach spring
Spring hook (50305017000)
–
Tighten screws
Guideline
Remaining screws, chassis
F01028-11
p. 49)
A
.
p. 50)
p. 49)
A
.
p. 50)
1
.
2
with the washers and take off the main silencer.
1
with the washers, but do not tighten yet.
2
.
1
.
6 mm (0.24 in)
M6
10 Nm (7.4 lbf ft)
52