Hardware installation
5.4.1
Connecting the power cord
Figure 13: Connecting the power cord
Ê Connect the power cord to the server power supply unit (1).
Ê Thread the cable through the cable clamp and pull the cable clamp tight to
secure the power cord (2).
Now the insulated connector cannot be disconnected from the server
accidentally.
I
You can loosen the cable clamp by opening the small locking lever.
Ê Connect the power plug to a grounded power outlet in the in-house power
supply network or a power outlet of the socket strip in the rack, see Technical
manual for the rack.
74
Operating Manual
RX900 S2