Fujitsu Primergy RX900 S2 Operating Manual page 31

Memory notes
Memory module notes
Interfaces
USB connectors
Graphics (15-pin)
Serial (9-pin)
LAN / Ethernet (RJ-45) 6x Gbit/s Ethernet, 2x 10 Gbit/s Ethernet
Service LAN (RJ45)
Onboard or integrated controllers
RAID Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
RX900 S2
Basic configuration includes 4 CPU Memory Risers.
Each expansion includes two additional
CPUMEMRs. CPUMEMRs are populated in four
steps. In each step, four DIMM memory modules are
added. At least four DIMM memory modules must be
installed on CPUMEMR #1 and #2. CPUMEMRs #3
to #8 can be left empty.
Memory modules will be delivered in sets of 4
DIMMs per order code.
Intel 7500 Scalable Memory Buffer called Millbrook
supports max. 1066 MHz memory clock speed.
4 TB memory capacity will be possible with
availability of 32 GB DIMM modules.
9x USB 2.0 (3x front, 4x rear, 1x internal, 1x UFM)
2x VGA (1x front, 1x rear)
1x serial RS-232-C
1x dedicated service LAN port for iRMC S2 (10/100
Mbit/s); Service LAN traffic can be switched to
shared onboard Gbit LAN port
8 port SAS RAID 5/6 controller as option
Integrated Remote Management Controller
(iRMC S2, 128 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Infineon / separate module; TCG V1.2 compliant
(option)
Operating Manual
Functional overview
31