Fujitsu Primergy RX900 S2 Operating Manual page 16

Functional overview
In the event of errors, the ServerView Operations Manager refers you directly
to the affected component and its order information in the Illustrated Spares
catalog of the server in question. (This feature is not available for the Japanese
market.)
Baseboard D3144, CPU Memory Riser D3145, PCI Riser D3046
The basic elements of the RX900 S2 server are the Baseboard D3144, 4 to 8
CPU Memory Risers (CPUMEMR) D3145, and the PCI Riser (PCIR) D3146.
Their hardware and BIOS features are described in the "Baseboard D3144,
CPUMEMR D3145, PCIR D3146 for PRIMERGY RX900 S2 Technical Manual"
and in the "D3144 BIOS Setup Utility for PRIMERGY RX900 S2" manual.
PCIe slot configuration
The server comprises 16 PCI Express (PCIe) slots. Seven PCIe slots are
located on the PCI Riser, nine on the baseboard. Four of the PCIe slots on the
baseboard are PCIe hot-plug slots. An additional tenth PCIe slot on the
baseboard is reserved for the Modular RAID controller.
Hard disk and solid state drives
The server can be equipped with up to 8 HDD/SSD modules. Each HDD/SSD
module can accommodate a SAS/SATA hard disk drive or solid state drive with
a 2.5-inch format. The modules are connected to the SAS backplane wirelessly.
This allows HDD/SSD modules to be plugged in or pulled out easily.
The hard disk system is designed for SAS/SATA with one channel for each hard
disk drive/solid state drive.
The server has RAID configuration and HDD/SSD modules can be replaced
during operation, see "PRIMERGY RX900 S2 Server Upgrade and
Maintenance Manual".
SAS RAID controller
The SAS RAID controller for operating up to eight SAS/SATA hard disk drives
or solid state drives supports the RAID levels 0, 1, E1, 5, 6, 10, 50, and 60.
16 Operating Manual
RX900 S2