Rear Of Server; Global Error Indicator And Css Indicator - Fujitsu Primergy RX900 S2 Operating Manual

6.1.2

Rear of server

6.1.2.1

Global Error indicator and CSS indicator

Figure 17: CSS, ID, and Global Error indicators
Pos. Description
1 CSS indicator (yellow)
– Lights up yellow if a prefailure event was detected for a CSS
component that can be fixed (for reasons of precaution) with the
CSS concept.
– Flashes yellow if an error was detected that can be fixed with the
CSS concept.
– Does not light up when the system is OK.
If the event is still acute after a power failure, the indicator is activated
after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see
page 103.
2 ID indicator (blue)
– Lights up blue when the system has been selected by pressing the
ID button. To deactivate, press the button again.
– Flashes blue when the BMC is in emergency mode.
The ID indicator can also be activated via the ServerView Operations
Manager and the iRMC S2 Web interface and its status reported to the
ServerView Operations Manager and the iRMC S2.
RX900 S2
Operating Manual
Starting up and operation
"CSS components" on
83