Fujitsu Primergy RX900 S2 Operating Manual page 62

Hardware installation
Figure 6: Fitting the support bracket
Ê Position the support bracket on the rear left support upright so that the
screws will be placed as follows:
– Upper screw: 3rd catch of the 5. HU
– Lower screw: 1st catch of the 3. HU
The knobs on the support bracket will help you to adjust the position (1).
Ê Secure the support bracket with two centering screws (2).
62
5. HU
2. HU
Operating Manual
2x
RX900 S2