Incorrect Date And Time; Drives Reported As "Dead" When Starting System - Fujitsu Primergy RX900 S2 Operating Manual

Troubleshooting and tips
8.6

Incorrect date and time

Ê Set the date and time in the operating system or in the BIOS Setup under
the Main menu, using System Date and System Time respectively.
I
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under
Linux, and would overwrite the system time in the default setting on
shutdown.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the
"Baseboard D3144, CPUMEMR D3145, PCIR D3146 for PRIMERGY
RX900 S2 Technical Manual" or contact our customer service team.
8.7 Drives reported as "dead" when starting
system
SAS RAID controller configuration incorrect
Ê Check and correct the settings for the drives using the SAS RAID controller
utility.
Further information is provided in the manual for the SAS RAID controller.
100 Operating Manual
RX900 S2