Fujitsu Primergy RX900 S2 Operating Manual page 107

A possible hard disk drive/solid state drive failure is reported by the CSS
indicator lighting up on the front and rear of the server as well as by the indicator
on the HDD/SSD module in question, see
modules" on page
The hard disk drive/solid state drive failure is also displayed on the ServerView
Local Service Display, see the "Customer Self Service (CSS)" manual on the
ServerView Suite DVD 2.
V
CAUTION!
The hard disk drive/solid state drive must not be removed from the
●
installation frame by anyone except a service technician.
The HDD/SSD modules (drives) must all be marked clearly so that
●
they can be put back in their original places after an upgrade. If this
is not done, existing data can be lost.
The hot-plug function is only possible in conjunction with a
●
corresponding RAID configuration.
Further information about the RAID configuration or RAID level can
be found in the RAID controller documentation.
Do not touch the circuitry on boards or soldered parts. Hold the
●
metallic areas or the edges of the circuit boards.
Before removing the unit, wait for about 30 seconds until the disk
●
stops spinning completely.
When the hard disk/solid state unit is starting up, you may hear a
●
resonant noise for a while, but this does not mean a failure.
Depending on the OS, you can configure the write cache settings for
●
the hard disk drives/solid state drives. If a power failure should occur
while the write cache is enabled, cached data may be lost.
When disposing of, transferring, or returning a hard disk/solid state
●
unit, wipe out the data on the drive for your own security.
Rough handling of hard disk/solid state units can damage the stored
●
data. To cope with any unexpected problems, always back up
important data. When backing up data to another hard disk drive/solid
state drive, you should make backups on a file or partition basis.
Be careful not to hit the hard disk/solid state unit or bring it into contact
●
with metallic objects.
Use the device on a shock and vibration free surface.
●
RX900 S2
82.
Operating Manual
"Indicators on the hot-plug HDD/SSD
CSS components
107