Hardware installation
Ê Mount the server (see
server" on page
of the rack.
Racks with installation depth smaller/greater than 735 mm
The rails can be used for installation depths of 714 - 785 mm. The spring
element of the rails is used to adjust the length as required.
Ê Secure the rails as described in
Ê Mount the server (see
server" on page
of the rack.
68
"Preparing the server" on page 65
66) and route the cables as described in the original manual
"Installing the rail in the rack" on page
"Preparing the server" on page 65
66) and route the cables as described in the original manual
Operating Manual
and
"Inserting the
63.
and
"Inserting the
RX900 S2