Suzuki VL125 Service Manual page 95

3-60 ENGINE
• Install the washer 1, cam chain tensioner 2 and cam chain
tensioner bolt.
• Tighten the cam chain tensioner bolt to the specified torque.
" Cam chain tensioner bolt: 10 N . m (1.0 kgf . m)
• Install the cam chain.
STARTER CLUTCH AND GENERATOR ROTOR
• Fit the key 3 in the slot on the crankshaft.
• Degrease the tapered portion of the rotor and also the crank-
shaft. Use nonflammable cleaning solvent to wipe off the oily
or greasy matter to make these surfaces completely dry.
• Install the starter driven gear 4 to the starter clutch rotating
the starter driven gear.
• Install the rotor with the starter driven gear onto the crank-
shaft securely.
• With the generator rotor held immovable using special tool,
tighten the generator rotor nut to the specified torque.
" Generator rotor nut: 80 N . m (8.0 kgf . m)
% 09930-44530: Rotor holder