Master Cylinder Removal And Disassembly - Suzuki VL125 Service Manual

MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain brake fluid from the front brake side reservoir. (92-
14)
• Disconnect the brake light switch lead wire coupler.
• Remove the union bolt 1.
7
Place a rag under the union bolt so that brake fluid may
not contact the parts.
• Remove the master cylinder.
• Remove the brake light switch 1 and brake lever 2.
• Remove the reservoir tank cap.
• Detach the dust seal boot 3 and remove the circlip.
• Pull out the piston/cup set 4 and spring 5.
CHASSIS 5-17