Suzuki VL125 Service Manual page 156

• Tighten the front fork lower clamp bolts 1 and front fork cap
bolts 2 to the specified torque.
• Tighten the front fork upper clamp bolts 3 to the specified torque.
" Front fork upper clamp bolt: 23 N . m (2.3 kgf . m)
Front fork lower clamp bolt: 33 N . m (3.3 kgf . m)
Front fork cap bolt: 23 N . m (2.3 kgf . m)
• With the stopper nut installed to the stearing stem hole A, as-
semble the turn signal light.
• Install the front fender and tighten the mounting bolts tempo-
rarily.
• Install the front brake caliper. (95-15)
• Install the front wheel. (95-12)
• Move the front fork up and down several times.
• Tighten the front fender mounting bolts securely.
CHASSIS 5-29