Removal - Suzuki VL125 Service Manual

5-36 CHASSIS

REMOVAL

• Remove the drive chain cover.
• Remove the rear brake adjusting nut 1, spring 2 and washer
3.
• Remove the cotter pin, torque link nut 4 and bolt.
• Remove the rear axle nut 5.
• Raise the rear wheel off the ground with a jack or wooden block.
• Loosen the drive chain adjusters 6, left and right.
• Remove the rear axle.
• Disengage the drive chain from the rear sprocket.
• Remove the rear wheel.
• Remove the rear brake panel 7.
(Rear brake: 95-42)
• Remove the spacer 8.
• Remove the rear sprocket 9 with mounting drum from the rear
wheel.
NOTE:
Before separating the rear sprocket and mounting drum, slightly
loosen the rear sprocket bolts.
• Remove the rear sprocket damper 0.