Float Height Adjustment - Suzuki VL125 Service Manual

FUEL AND LUBRICATION SYSTEM 4-17

FLOAT HEIGHT ADJUSTMENT

To check the float height, turn the carburetor upside down. Mea-
sure the float height A while the float arm is just contacting the
needle valve using vernier calipers.
% %
% % % 09900-20102: Vernier calipers
# Float height A : 9.9 ± ± ± ± ± 1.0 mm
• Bend the float arm 1 as necessary to bring the float height A
to the specified level.
• After adjustment, check the float height and the fuel level again.