Inspection; Reassembly And Remounting - Suzuki VL125 Service Manual

INSPECTION

BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to deter-
mine the extent of wear. Replace the brake drum if the measure-
ment exceeds the service limit. The value of this limit is indicated
inside the brake drum.
% 09900-20102: Vernier calipers
# Brake drum I.D.: Service Limit: 130.7 mm
BRAKE SHOES
Check the brake shoe wear (92-18) and decide whether it
should be replaced or not.
7
Replace the brake shoes as a set, otherwise braking per-
formance will be adversely affected.

REASSEMBLY AND REMOUNTING

BRAKE CAMSHAFT
• When installing the brake camshaft, apply SUZUKI SUPER
GREASE "A" to the camshaft and cam face.
/ 99000-25010: SUZUKI SUPER GREASE "A"
• Install the brake shoes with spring hooks faced inside.
7
Be careful not to apply too much grease to the cam and
pin. If grease gets on the lining, brake slippage will re-
sult.
BRAKE CAM LEVER
• Install the new O-ring and washer.
• Install the brake cam lever to the brake camshaft as shown.
CHASSIS 5-43
17°