Suzuki VL125 Service Manual page 90

GEARSHIFT SHAFT
• Install the gearshift arm stopper 1.
" Gearshift arm stopper: 19 N . m (1.9 kgf . m)
• Install the washer 2 and gearshift cam stopper 3, and tighten
the gearshift cam stopper bolt 4.
" Gearshift cam stopper bolt: 10 N . m (1.0 kgf . m)
• Hook the gearshift cam stopper spring 5.
• Install the washer 6 and nut 7.
• Check the neutral position.
• Install the gearshift cam stopper plate after aligning the gear-
shift cam pins A with the gearshift cam stopper plate holes.
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
- 99000-32050: THREAD LOCK "1342"
" Gearshift cam stopper plate bolt: 10 N . m (1.0 kgf . m)
• Install the gearshift shaft after aligning the return spring with
the gearshift arm stopper B.
• Install the washer 8 and circlip 9.
ENGINE 3-55