Starter Motor Reassembly - Suzuki VL125 Service Manual

STARTER MOTOR REASSEMBLY

Reassemble the starter motor. Pay attention to the following
points:
&
Replace the O-ring with a new one to prevent oil leak-
age and moisture.
• Reassemble the starter motor as shown in the illustration.
• Align the mark A on the housing with the line B on the hous-
ing end.
• Apply grease to the O-ring, and remount the starter motor.
- 99000-25010: SUZUKI SUPER GREASE "A"
ELECTRICAL SYSTEM 6-13
1 Starter motor case
2 O-ring
3 Housing end (inside)
4 O-ring
5 O-ring (2 pcs)
6 Housing end (Outside)
7 O-ring
8 Brush holder
9 Brush (4 pcs)
0 Brush spring (4 pcs)
A Armature