Suzuki VL125 Service Manual page 93

3-58 ENGINE
• Install the clutch sleeve hub nut, and tighten it to the specified
torque using the special tool.
% 09920-53740: Clutch sleeve hub holder
" Clutch sleeve hub nut: 50 N . m (5.0 kgf . m)
• Bend the lock washer securely.
• Install the clutch drive plates and driven plates.
1 Clutch drive plate No. 2
2 Clutch drive plate No. 1 (×2)
3 Clutch driven plate (×3)
• Install the clutch plate spacer 4.
• Install the clutch release rack 5, bearing 6 and washer 7.
• Install the clutch pressure plate 8, clutch springs and clutch
spring mounting bolts.
• Hold the primary drive gear nut and tighten the clutch spring
mounting bolts in a crisscross pattern.
NOTE:
Make sure that the clutch pressure plate is installed correctly.
" Clutch spring mounting bolt: 10 N . m (1.0 kgf . m)
Inside
Outside