GE NX-10 Installer Manual page 70

Location Term
2.3.2.2 Authority
2.3.2.2.1 Arm Only After Closing
2.3.2.2.2 Arm Only
2.3.2.2.3 Arm/Disarm
2.3.2.2.4 Master Code
2.3.2.2.5 Bypass Zones
2.3.2.2.6 Reports Open/Close
2.3.2.3 Partitions
2.3.3 Duress Code
2.3.4 GuardCodes 16 17
2.3.5 User Auth for Progrm.
2.4 Communications
Definition
A menu entry that groups access options. These options
specify the level of access an individual has when using the
control panel.
A menu option that specifies a code that arms the system
during the close window only (when the system is
scheduled to be armed). If entered during the open window
when the system is turned off, the code does not arm the
system.
A menu option that specifies a code that arms the system
and does not perform any other function. For example, the
code issued to service staff.
A menu option that specifies a four-digit or six-digit code
that arms or disarms the system depending on its current
status.
A menu option that specifies a code that can program
other user codes provided it has access to the same
partitions as the user code. The user 1 code is the default
master code.
A menu option that allows the selected code to bypass
zones.
A menu option that specifies a code that reports arms
(close) and disarms (open) to the central station.
A Codes menu entry that lists the partitions assigned to the
selected code. The selected code can trigger an event on
these partitions.
A menu option that sets the duress code. A duress code
disarms the system and activates a duress alarm. This is a
silent alarm that sends a special report to the central
station.
A menu option that sets the codes 16 and 17 as guard
codes.
In this case, user codes 16 and 17 cannot be programmed
or changed anymore via a master code. They can only be
changed via the up/download software. Guard code 16 will
be able to arm/disarm at any time. Guard code 17 will only
be able to arm/disarm during an alarm condition. Only
when an alarm condition occurs, guard code 17 will be
able to disarm the system. After having evaluated the
alarm condition, guard code 17 can arm the system again
but will not be able to disarm anymore (see also location
41, segment 1, option 7).
A menu option specifying that user authorisation is
required in order to enter program mode.
A menu entry that groups options for communication
between the control panel and the up/download software
or central stations.