Setting Arm Schedules; Setting Up Schedules - GE NX-10 Installer Manual

Setting arm schedules

Figure 20. Arm Schedules menu
Arm Only After Close
2.7.1
Auto Arm
2.7.2
Auto Disarm
2.7.3
Schedule Times
2.7.4
The control panel can be programmed to automatically disarm (open) and arm (close) partitions at
specified times on specified days. To program auto-arm schedules, you must enable the advanced
menu. Select Installer Menu>Maintenance Mode>Advanced Menu>Enabled and press OK. Then
select Installer Menu>Control Panel>Arm Schedules.
Note: If reports are sent, the user code will be 97 in logs and reports.

Setting up schedules

You can set up a schedule to control the opening and autoarming events for each partition. The
following example sets a schedule for partition 1 so that it is automatically closed at 18.00 on a
Monday if there is no activity in the building. If there is activity at closing time, the control panel will
try to arm after every 45 minutes of inactivity until the next opening time, or until the system is
armed manually.
Ensure the advanced menu is enabled.
1.
Navigate with the
2.
Scroll to Auto Arm>Partition 1>Sunday>Yes and press OK.
3.
The keypad beeps once to accept the change and returns to Sunday.
4.
Scroll to 45 Minute Retry>Enabled and press OK.
5.
The keypad beeps once to accept the change and returns to 45 Minute Retry.
6.
(1) Partition 1
2.7.1.1
Partitions 2 - 4
Same as above
2.7.1.1.3
2.7.1.1.4
2.7.1.1.5
2.7.1.1.6
(1) Partition 1
2.7.2.1
Partitions 2 - 4
Same as above
(1) Partition 1
2.7. .1 3
Partitions 2 - 4
Same as above 2.7. .1.3
2.7. .1.4
2.7. .1.5
2.7. .1.6
Opening
2.7. .1 4
Closing/Autoarm
2.7. .2 4
keys to Control Panel>Arm Schedules and press OK.
Sunday
2.7.1.1.1
Monday
2.7.1.1.2
Tuesday
Wednesday
Thursday
Friday
Saturday
2.7.1.1.7
Sunday
2.7.2.1.1
Monday
2.7.2.1.2
Tuesday
2.7.2.1.3
Wednesday
2.7.2.1.4
Thursday
2.7.2.1.5
Friday
2.7.2.1.6
Saturday
2.7.2.1.7
45 Minute Retry
2.7.2.1.8
Sunday
2.7. .1.1 3
Monday
2.7. .1.2 3
Tuesday
3
Wednesday
3
Thursday
3
Friday
3
Saturday
2.7. .1.7 3
Hour
2.7. .1.1 4
Minute
2.7. .1.2 4
Hour
2.7. .2.1 4
Minute
2.7. .2.2 4
NX-10 Installers manual
63