GE NX-10 Installer Manual page 158

Location Term
3.5 Set KP Language
3.6 Program KP Text
3.6.1 Zones/Messages
3.6.1.1.1 Zone Names
3.6.1.1.2 Partition Names
3.6.1.1.3 Custom Message
3.6.1.1.4 Shutdown Message
3.6.1.1.5 Copy Language
3.6.2 User Names
3.6.3 Zone Type Names
3.6.4 Word Library
3.7 Copy Keypad
3.7.1 To One Keypad
3.7.2 To All Keypads
3.8 Load Country Defaults
Definition
A menu option that selects the keypad interface languages
available to the user. It is possible to select up to four
languages (Language 1 to 4) out of all available interface
languages. The languages selected here, can be then
toggled by the user (or installer) with the OK key.
A menu entry that groups the language options of the
current keypad. It allows the installer to set options such as
zone name descriptors and user names.
A menu entry that groups descriptors, such as zone names
and custom messages. These names and messages are
language dependent, for example, setting a display
language also changes displayed zone names to the ones
defined for this language.
A menu option that specifies the name of each zone and
allows these names to be edited.
A menu option that specifies the name of each partition.
A This Keypad menu option that edits the custom
message.
A menu option that edits the message that is displayed on
the keypad when the control panel is in shutdown mode.
A menu option that copies information from the current
keypad descriptors to another or multiple keypads in the
system. Included are the zone descriptors, custom
message, shutdown message, zone names and partition
names.
A menu option that specifies a name for each user code.
The maximum length of a user name is 15 characters.
A menu option that allows the installer to define names for
each installed zone type. For example, Type 1 can be
named Burglary A Alarm, Type 2 can be named Fire Alarm,
Type 3 can be named Entry/Exit and so on.
A menu option that enables the word library. This is a
predefined collection of words that speed up text editing.
As the user/installer types a character, the keypad
automatically displays a matching word. The word library
is enabled by default.
A menu option that copies the current keypad settings to
another or multiple keypads in the system.
A menu option that specifies that the current keypad
settings are copied to one specific keypad.
A menu option that specifies that the current keypad
settings are copied to all connected keypads.
IMPORTANT: In the system with mixed (wired and wireless)
keypads, it is strongly recommended to start this
command from a WIRED keypad. Triggering this command
from a wireless keypad in the mixed system can end with
a timeout and cause incorrect copying results.
A menu option that defaults the keypad to the country
settings for the selected country.