Configuring An Output - GE NX-10 Installer Manual

The control panel includes up to 2 programmable on-board auxiliary outputs. To program on-board
outputs, select Installer Menu>Control Panel>Outputs.

Configuring an output

You can change the characteristics of each output. You must specify the events and/or partitions that
activate an output and the length of time for which the output is activated. The events are grouped in
the programming tree. A full list of all possible selectable events can be found in the Table 12,
Control panel output events. The following example configures output 1 to activate for 15 minutes
when a burglary alarm occurs.
Navigate with the
1.
press OK.
Scroll to Event>Alarms>Burglary Alarm and press OK.
2.
The keypad beeps once to confirm the change and returns to Alarms.
3.
Scroll to Time Unit>Minutes and press OK.
4.
The keypad beeps once to confirm the change and returns to Time Unit.
5.
Scroll to Time and press OK.
6.
Select 15 min. and press OK to accept the changes.
7.
The keypad beeps once to confirm the change and returns to Time.
8.
Table 12. Control panel output events
Data Event
0 Burglary alarm
1 Fire alarm
2 24 hour alarm
3 Trouble alarm
4 Tamper alarm
5 Yelping siren
6 Steady siren
7 Any siren
8 Any bypass
9 AC fail
10 Low battery
11 Duress
12 Aux 1 keypad (fire alarm)
13 Aux 2 keypad (medical alarm)
14 Panic keypad
15 Keypad tamper
16 Automatic test
17 Alarm memory (solid)
18 Entry
19 Exit
20 Entry or exit
21 Armed state
22 Disarmed state
23 Ready
24 Not ready
keys to Control Panel>Outputs>Prog Outputs>Output 1 and
Data Event
30 Open period
31 Closed period
32 Listen-in
33 Line seizure
34 Reserved
35 Fail to communicate
36 Telephone line fault
37 Program mode
38 Download in process
39 Reserved
40 Short circuit (overcurrent on 12 V DC)
41 Box tamper
42 Siren tamper
43 Any open
44 Any short
45 Any fault (open/short on non-fire zone)
46 Any alarm
47 Audible keypad
48 Code entry (see note below)
49 Keyfob function 1
50 Keyfob function 2
51 Always ON
52 Autoarm warning time
53 Any siren when in away mode
54 Progress of entry/exit (follows keypad
buzzer)
NX-10 Installers manual
53