Session - Cisco Catalyst Blade Switch 3130 Reference Manual

session

session
Use the session privileged EXEC command on the stack master to access a specific stack member.
Note This command is supported only on stacking-capable switches.
Syntax Description
stack-member-number
Defaults No default is defined.
Command Modes
Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines
When you access the stack member, its stack member number is appended to the system prompt.
Examples
This example shows how to access stack member 6:
Switch(config)# session 6
Switch-6#
Related Commands Command
reload
switch priority
switch renumber
show switch
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-374
session stack-member-number
Modification
This command was introduced.
Description
Reloads the stack member and puts a configuration change into effect.
Changes the stack member priority value.
Changes the stack member number.
Displays information about the switch stack and its stack members.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Specify the stack member number. The range is 1 to 9.
OL-13271-01