Show Switch - Cisco Catalyst Blade Switch 3130 Reference Manual

show switch

show switch
Use the show switch user EXEC command to display information related to the stack member or the
switch stack.
This command is supported only on stacking-capable switches.
Note
Syntax Description
stack-member-number
chassis-mgmt
detail
neighbors
stack-ports
stack-ring activity
[detail]
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
These are the states displayed from this command:
•
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-586
show switch [stack-member-number | chassis-mgmt | detail | neighbors | stack-ports | stack-ring
activity [detail]] [ | {begin | exclude | include} expression]
(Optional) Display information for the specified stack member. The range
is 1 to 9.
(Optional) Display information about the enclosures in which the stack
members are installed.
(Optional) Display detailed information about the stack ring.
(Optional) Display the neighbors for the entire switch stack.
(Optional) Display port information for the entire switch stack.
(Optional) Display the number of frames per stack member that are sent to
the stack ring. Use the detail keyword to display the ASIC, the receive
queues, and the number of frames per stack member that are sent to the
stack ring.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Waiting—The state when a switch is booting up and waiting for communication from other switches
in the stack. The switch has not yet determined whether it is a stack master or not.
Stack members not participating in a stack master election remain in the waiting state until the stack
master is elected and ready.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
OL-13271-01