Cisco Catalyst Blade Switch 3130 Reference Manual page 47

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Usage Guidelines
You must specify that the /source-system-num option uses the /version option. The options together
upload the specified image, not the running image, of a specific stack member.
Use the upload feature only if the HTML files associated with the embedded device manager have been
installed with the existing image.
The files are uploaded in this sequence: the Cisco IOS image, the HTML files, and info. After these files
are uploaded, the software creates the tar file.
Image names are case sensitive.
Examples This example shows how to upload the currently running image on stack member 6 to a TFTP server at
172.20.140.2:
Switch# archive upload-sw /source-system-num 6 tftp://172.20.140.2/test-image.tar
Related Commands Command
archive copy-sw
archive download-sw
archive tar
OL-13271-01
Description
Copies the running image from the flash memory on one stack member to the
flash memory on one or more other stack members.
Downloads a new image to the switch.
Creates a tar file, lists the files in a tar file, or extracts the files from a tar file.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
archive upload-sw
2-19