Cisco Catalyst Blade Switch 3130 Reference Manual page 452

show dot1x
Table 2-22
Field
RxInvalid
RxLenError
RxTotal
TxReq
TxReqId
TxTotal
RxVersion
LastRxSrcMac
Related Commands Command
dot1x default
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-424
show dot1x statistics Field Descriptions (continued)
Description
Number of EAPOL frames that have been received and have an unrecognized
frame type.
Number of EAPOL frames that have been received in which the packet body
length field is invalid.
Number of valid EAPOL frames of any type that have been received.
Number of EAP-request frames (other than request/identity frames) that have
been sent.
Number of Extensible Authentication Protocol (EAP)-request/identity frames
that have been sent.
Number of Extensible Authentication Protocol over LAN (EAPOL) frames of any
type that have been sent.
Number of received packets in the IEEE 802.1x Version 1 format.
Source MAC address carried in the most recently received EAPOL frame.
Description
Resets the IEEE 802.1x parameters to their default values.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
OL-13271-01