Cisco Catalyst Blade Switch 3130 Reference Manual page 65

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
When you enter the boot system switch number or the boot system switch all command on the stack
master, the stack master checks if a software image is already on the stack member (except on the stack
master). If the software image does not exist on the stack member (for example, stack member 1), an
error message like this appears:
%Command to set boot system switch all xxx on switch=1 failed
If you are using the archive download-sw privileged EXEC command to maintain system images, you
never need to use the boot system command. The boot system command is automatically manipulated
to load the downloaded image.
This command changes the setting of the BOOT environment variable. For more information, see
Appendix A, "Cisco Catalyst Blade Switch 3130 for Dell Boot Loader Commands."
Related Commands Command
show boot
OL-13271-01
Description
Displays the settings of the boot environment variables.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
boot system
2-37