Show Platform Ip Unicast Vrf Compaction - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Appendix C
Cisco Catalyst Blade Switch 3130 for Dell Show Platform Commands
show platform ip unicast vrf compaction
Use the show platform ip unicast vrf compaction privileged EXEC command to display the
compaction request queues and compaction status.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
OL-13271-01
show platform ip unicast vrf compaction [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
show platform ip unicast vrf compaction
C-15
Advertisement
Table of Contents
