Clear Spanning-Tree Counters - Cisco Catalyst Blade Switch 3130 Reference Manual

clear spanning-tree counters

clear spanning-tree counters
Use the clear spanning-tree counters privileged EXEC command on the switch stack or on a standalone
switch to clear the spanning-tree counters.
Syntax Description
interface interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(40)EX1
Usage Guidelines
If the interface-id is not specified, spanning-tree counters are cleared for all interfaces.
Examples
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Related Commands Command
show spanning-tree
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-64
clear spanning-tree counters [interface interface-id]
(Optional) Clear all spanning-tree counters on the specified interface. Valid
interfaces include physical ports, VLANs, and port channels. The VLAN
range is 1 to 4094. The port-channel range is 1 to 48.
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
OL-13271-01